Product Information Sheet

Product Name: Tile and Grout Kleaner

Item Number: BA10Q

Description: Tile and Grout Kleaner is a one-step foamy cleaner disinfectant containing a blend of phosphoric and hydroxyacetic acids for efficient removal of lime, soap scum, hard water deposits, uric acid salts, and various discolorations from toilet bowls, urinals, shower stalls, ceramic tiles and sinks. It is effective against Staphylococcus aureus, Pseudomonas aeruginosa, and Salmonella choleraesuis in the presence of 5% organic serum when tested according to AOAC Germicidal Spray Products Disinfectant Method. Recommended for use in hospitals, nursing homes, schools, hotels, and other commercial and institutional establishments.

Directions:  For cleaning and disinfecting tubs, sinks, shower stalls and other hard porous surfaces: Remove gross filth and heavy soil deposits. Direct a coarse spray onto surface for 10 seconds from a distance of about 12 inches. Allow foam to wet surface for 10 minutes. Rinse surfaces thoroughly with water.

For General Cleaning and Deodorizing: For hard non-porous surfaces, dilute up to 1:10 with water and apply with a mop, sponge, cloth, or a trigger sprayer. Rinse thoroughly with water.

DANGER: CORROSIVE. Causes severe eye and skin damage. Do not get in eyes, on skin or on clothing. Wear goggles or face shield and rubber gloves when handling. Harmful if swallowed. Avoid contamination of food. Remove and wash contaminated clothing. Wash thoroughly with soap and water after handling. STATEMENT OFPRACTICAL TREATMENT: In case of contact, immediately flush eyes or skin with plenty of water for at least 15 minutes. For eyes, call a physician. Remove and wash contaminated clothing before reuse. If swallowed, drink water. Avoid alcohol. Call a physician immediately. NOTE TO PHYSICIAN: Probable mucosal damage may contraindicate the use of gastric lavage. Measures against circulatory shock, respiratory depression and convulsion may be needed. KEEP OUT OF REACH OF CHILDREN. Container Disposal: See product label copy for specific information.

Container Disposal: See product label copy for specific information

Spill Or Leakage Procedures: Contain fluid by diking. Neutralize with soda ash or baking soda. Neutralize material may be washed down the sewer. Absorbed material to be boxed and disposed of in compliance with local, state and federal regulations.

Product Specifications:

CAS NUMBERS: Phosphoric Acid 7664-38-2; Hydroxyacetic Acid 79-14-1; 2-Butoxyethanol 111-76-2; Alkyl dimethyl benzyl ammonium chloride 68424-85-1.

HMIS RATING: health-3; Flammability-0; Reactivity-0; Personal Protection-D