Our extensive family of lubricant products is engineered to provide outstanding performance and user benefits. Please see our list of products below and you will begin to understand what these extensive user benefits are. For further information please call us at 205-592-0844 or email us at info@k-chem.com. We look forward to working with you and helping you find that perfect product.

 

penetrants/lubricants



NUT BUSTER
Rust Penetrating Oil, Non-Flammable



Fast-acting penetrating formula for loosening rusted parts and freeing nuts and bolts. Leaves a residual lubricant. Assists in cleaning rusted parts. In aerosol only. Let us tell you more, click below!





Image
Image Image  Image
NUT BUSTER II
Penetrant, Lubricant, Demoisturant, Protectant



Non-chlorinated, non-flammable, 39 kV dielectric strength, displaces and dries out moisture in wet electrical systems and leaves protecting waterproof film. Let us tell you more, click below!




Image
Image Image  Image
PENETRANT GEL LUBRICANT
Three-In-One

Multipurpose penetrating lubricant spray, water clear, fast setup, and leaves behind a viscous, tacky lubricant resistant to throw off. Used as corrosion barrier, used on hinges, chains, sprockets, gears, etc. Aerosol.





Image
 ImageImage 


FREE-EZE
Rapidly Releases Frozen Nuts & Bolts

This product combines rapid freezing action with an advanced, rust eating formula, seized or rusted parts are easily released. Shrinkage of sprayed parts quickly breaks open micro fine fissures allowing the lubricant to easily penetrate even the toughest rust.





Image
  ImageImage


LUBRICATOR
Multipurpose Lubricating Fluid With Superior Lubricity

Also penetrates and loosens rusted parts. Has premium corrosion inhibitors and protects parts from moisture and oxygen. Aerosol and bulk.




RUST BREAK'R
Liquefies Rust Instantly

Fast and highly-efficacious penetrating lubricant. Frees bolts, nuts, fittings and other parts frozen by rust or corrosion. Non-flammable, cleans spark plugs, engine heads, automatic choke, marine parts, etc. Excellent on saltwater corrosion. Aerosol and bulk



  


Greases



SLIP SHOT II
Red Grease Spray


This multipurpose lubricant sprays as a thin, penetrating red liquid and quickly sets up to a thick grease capable of clinging to vertical surfaces. This grease withstands heat to 500ºF with excellent adhesive, cohesive, extreme pressure, and cushioning properties. It lubricates, prevents oxidation and rust. Contains no chlorinated solvents or ozone depleters. Aerosol.



GREASE-GUN-IN-A-CAN
Red Grease Spray

Sprays thin penetrating liquid that converts to a tack-free grease within 5 minutes. Impervious to salt and moisture, stable at 400ºF and -40. Lubricates & prevents rust. Will not rub or wear off. USDA.






 
LITHIUM E.P. GREASE
Multi-Purpose Lithium Sterate Extreme Pressure Grease

It is fortified with corrosion inhibitors, anti-wear agents and extreme pressure additives. Dropping point is 300ºF, and timkin load 40, NLGI Grade 2. In cartridges and bulk.






WHITE LITHIUM GREASE
White Lithium Grease

Clear, all-weather, long-lasting, water-resistant grease. Penetrates into parts before thickening to a grease. Resists temperatures up to 350º. In aerosol only.




  


MOLY GREASE
Heavy Duty High Temperature Lubricant With Molybdenum

Reduces friction and protects against excessive wear from extreme loads, timken load of 65, last longer because Moly "plates out". Fortified with tackifiers, corrosion and oxidation inhibitors. Available in tube or bulk.

  
SUPER IMPACT GREASE
Super Impact Grease

Grease is fortified with special additives enabling it to withstand the heavy impact and pounding pressure common to heavy equipment. Anti-spatter capability and a non-melt grease with superior water resistance. In cartridges and


  
PL-10 POWER-LIFT GREASE
Maximum Protection Against Wear and Extreme Pressure

This grease adheres to metal providing top performance in roll stability. Provides constant and maximum lubrication. Offers the maximum in friction reduction and resists water washout. Noncorrosive, has maximum film strength. It is lithium complex and exceeds all other lithium grease due to addition of extreme-pressure and antifriction lubricants.

  




  


Specialty Lubricants



ANTI SEIZE LUBRICANT
Anti-Seize and Sealing Compound


Seals, lubricates and protects all threaded parts and metal mating surfaces from heat, corrosion, galling, fusion, pitting and seizure up to 2000ºF. (1090ºC) Seals gaskets, and prevents sticking for ease of removal and simpler maintenance. In aerosol only, and brush tap.



CUTTING FLUID
Heavy Duty Concentrated Cutting Oil

This solution is fortified with active sulfur and an extreme pressure additive for all types of machine shop uses. This coolant/lubricant increases production, protects cutting tools, gives excellent cooling, has rust protection and low foaming. Will not cause freezing of chucks and callets. In aerosol.





DRY SILICONE
Silicone Lube

Non toxic, clean lubricant that makes everythingslide and glide easier. For doors, windows, drawers, etc. Waterproofs ignition systems, spark plugs, insulation, and distributors. A must for every industry or shop. In aerosol only.






DRY MOLY
Dry Molly Lube

A quick-drying lubricating film with superior anti-friction, anti-seizing properties suitable for high pressure and high temperatures. Excellent for dirty environments where oil or grease is not suitable. In aerosol only.




  


GEAR & CHAIN LUBRICANT
Open Gear Lubricant

A unique lubricant that acts to recoat each gear tooth with each revolution. Maintains quiet running gears over long periods even in wet conditions. Excellent for stamping presses, shears, punches, forming rolls, etc. Excellent on elevator and drag cable. High melting point. Won't wash off. In aerosol only.

  
SYNTHETIC COOLANT
Low Foam Cutting Coolant

Fantastic coolant for machining, cutting, grinding, milling, drilling, turning, reaming, boring, tapping, sawing, hobbing, threading, etc. Also safe on leaded steel, navy brass, carbon steel, stainless steel, vanadium, chromemolybdenum, iconel, etc. Non-irritating to the skin and non-flammable. In aerosol and bulk.