solvents

Our safety solvents are state of the art unique products. Our non-chlorinated solvents have a faint to no solvent smell, both in aerosol and bulk. Our non-chlorinated contact cleaners cause no frost out, which allows them to be used on energized surfaces. Our chlorinated solvents have masked the solvent odor with a pleasant fragrance, also in aerosol and bulk. Please see our list of products below. For further information please call us at 205-592-0844 or email us at info@k-chem.com. We look forward to working with you and helping you find that perfect Solvent.

Watch our detailed video on Non-Chlorinated Solvents and Degreasers Here! Image 

 

K-CHEM 2002 SAFETY SOLVENT
Safety Solvent Degreaser, Non-Ozone Depleting, Non-Chlorinated Solvent, Non-Flammable Non-Conductive to 24,000 Volts, Fast Drying, Leaves No Residue Low Odor High Solvency

This non-chlorinated, nonflammable, nonconductive blend may be used to clean and degrease a wide variety of equipment. The low odor formulation leaves no residue and is compatible with many metals such as aluminum, brass, carbon steel, stainless, steel, copper, titanium, magnesium and zinc. It is safe for use on some plastics. Ideally used for general purpose degreasing when chlorinateds can't be used and flammability can't be tolerated.



Image
Available in aerosol
 Image  Image Image

and Bulk:
Image  Image
MR. KWIK
Rapid Drying, Powerful Flushing Action Solvent

EPA-accepted alternative chlorinated solvent. Ozone safe, non-flammable, no CFCs, no petroleum distillates. 36,200 volt dielectric strength, strong cleaning action, residue-free.
















Image
Available in aerosol
 Image  Image Image

and Bulk:
Image  Image Image
BRAKE & PARTS CLEANER II
Non-Chlorinated, Blast Spray Pattern

Powerful blasting spray easily removes brake fluid, grease, oily dirt and contaminants from linings, pads and drums, cylinders and springs without disassembling the brake unit. This special formula is also suitable for cleaning equipment, tools plus parts and meets or exceeds current state V.O.C. requirements.




Image
Image  Image 
GREASEATER
Parts Washer, Non-Flammable, High FlashSolvent, High Grease Cutter
MIL-PRF-680, Type II

This high flash, above 143 F, solvent combined with grease and oil emulsifiers penetrates and removes crusted oil and grease deposits. It has been hydrotreated, which removes the sulfur content of the solvent. It meets California indoor air quality specifications. And it meets MIL-PRF-680, Type II. Available in bulk.



Image
Image  Image  Image
KONTACT KLEANER III
Non-Flammable, Non-Hazard, Safe on MostPlastics

Removes oil, dirt, condensation and moisture from circuit boards, precision instruments, oxygen equipment, controls, switches, and electrical motors. Approved for short-term contact (normal aerosol light spray use) on a wide variety of component plastics.




Image
Image  Image
KONTACT KLEANER II
Non-Chlorinated, Non-Flammable, No CFCs, Low % VOCs, Non-Hazard, Safe on Most Plastics

Contact and circuit board cleaner, high dielectric formula developed to quickly remove oil, grease, flux and other contaminants from delicate electronic circuitry. Dissolves residue and safely flushes away particulate matter. Developed for radio, TV, aeronautical and communications industries. In aerosol and bulk.

Image
Image  Image
RIGHT STUFF
Delamomine Degreaser, Declogger, Deodorizer

Degreaser, declogger and deodorizer. 100% organic formulation representing a completely new approach in one step. Non-corrosive and contains no petroleum distillates, organic halides or alkalis. Multipurpose formulation will strip grease and heavy oil deposits from virtually any surface. Will emulsify instantly in water. In bulk only.













Image
 Image  Image
K-CHEM 2000 SAFETY SOLVENT
Fast-Dry, Non-Chlorinated, High Solvency, NoResidue, Non-Ozone-Depleting, Safe on Many Plastics, High Dielectric

Powerful degreasing with fast evaporation. Non-flammable, non-conductive, low odor, has dual action valve system, allowing both misting spray and a 10' blast spray. Can be used on relays, switches, microchips, etc., and on electric motors, machinery, power equipment and much more. Is 18,000 volt dielectric. Meets MIL-T-81553A, MIL-C-2880, MIL-STD-2000 and NASA NHB 5300,4(3A-7).




Image
Available in aerosol
 Image  Image Image

and Bulk:
Image  Image
FAST SOLVENT DEGREASER
Special Dual Action Valve for Mist and Blast Sprays

Fast dry, non-flammable, non-conductive, 29,000 volt dielectric, non-ozone depleting, low odor, leaves no residue. Cleans electric motors, power equipment, printing press, conveyors. Aerosol and bulk.





Image
 Image  Image  Image
SOLV-KLEAN
Fast-Dry Solvent, Non-Ozone Depleting

This is a chlorinated solvent, has no Trichlor 1,1,1. Non-ozone depleting, very fast drying, non-residue, non-flammable, no flash point. In bulk.








Image
Image Image
COIL CLEANING FOAM
Clinging Foam Completely Self-Rinsing on Condensate Producing Coils

Heavy duty foam coil cleaner for window units, roof top HVAC units, auto radiator, metal filters, fan blades and more. Liquefies dirt, grease, oil and other deposits. Has corrosion inhibitors and safe on drain pans and plastics. Lemon fragrance. In aerosol








Image
ImageImage
KONTACT KLEANER IV
High Purity, Non-Flammable, Non-Residue, Fast Dry, Completely Plastic Safe

Nonconductive to over 20 KV and will not cause "freeze out" or attract moisture. Easily removes dirt, dust, light oils, flux, and more from contacts, circuit boards, relays, switches, solder joints, and electronics devices. Aerosol.










Image  Image
KONTACT KLEANER V
Nonflammable, Safe On Most Plastics, Dries Ultra Fast, Leaves No Residue, 30,000 volt Dielectric Strength, EPA SNAP Approved, VOC Exempt, No Harsh Fumes

Removes oil, grease, condensation, dust and other particulate matter, high purity spray on circuit boards, wire terminals, relays, switches, contacts, circuit breakers, tuners, potentiometers, cable ends & receptacles, control panels, motors & other electronics and electrical equipment. Safe on paint and rubber goods. In aerosol.






 Image  Image Image
K-CHEM 2004 SAFETY SOLVENT
Fast-Dry, Non-Chlorinated, High Solvency, No Residue, Non-Ozone-Depleting, Safe on Many Plastics, High Dielectric

This non-chlorinated, nonflammable, nonconductive blend may be used to clean and degrease a wide variety of equipment. The low odor formulation leaves no residue and is compatible with many metals including most types of steel, galvanized steel, brass, copper, magnesium, nickel, tin plate, titanium, zinc and more and is safe for use on some plastics. Ideally used for general purpose degreasing when chlorinateds can't be used and flammability can't be tolerated. Available in bulk.



 Image  Image Image
ALKA 250
Foaming Alkaline Cleaner

Concentrated double chelated, highly caustic foaming cleaner degrease for removal of carbonized and greasy soils. Excellent for cleaning smokehouses, ovens, fryers, coils, filters, and fins. USDA approved.















 
 Image  Image 

SOLV-300
Low Odor Safe On Most Plastics High Flash Point No-Residue Non-Conductive

Low odor solvent degreaser that removes most greases, oils, lubricants, etc. Safe on most plastic, has a high flash point, and no residue. Low odor and low inhalation toxicity for maximum work comfort and safety. Non-conductive, high flash point, no residue. Safe on ferrous and non-ferrous metals, and on many types of plastics.








 
 Image  Image
AIR DUSTER
Metal Parts Chiller and Component Checker

A quick, easy method for chilling small parts, bearings, bushings, swollen pipe joints. Makes assembly of tight-fitting parts easier. Also chills electronic components and controls for checking. In aerosol only




SHOOT OUT SPOTTER
Carpet & Upholstery Spotter


Shoot the spot out with inverted aerosol can. Effective on both water and soil stains. Contains odor neutralizers. In aerosol only.












COIL CLEANING SOLVENT
Maximum Cleaning with Blast Spray

Quickly liquefies dirt, grease, oil and undesirable materials. Evaporates quickly, nonflammable, nonconductive safe on live equipment. Pleasant lemon fragrance. In aerosol.





  
ELECTRON
Non-chlorinated High Dielectric Solvent

The environmentally preferred dielectric solvent. An exceptionally solvent degreaser formulated without chlorinated solvents or other hazardous ingredients. Has a high dielectric strength, safe to use on all electrical apparatus. High flash point. Has National Stock Numbers and is the non-chlorinated replacement for Trichlor 1,1,1. In bulk and aerosol.

VORTEX
Non-chlorinated Degreaser

An organic, semi-aqueous solvent. A blend of natural ingredients, 100% organic formulation representing a completely new approach in one-step degreasing. It is non-corrosive and contains no petroleum distillates or alkalis. This is also an aircraft body degreaser. In bulk only.

  


KWIK DRY
Fast Dry Solvent, Non-Ozone Depleting

Chlorinated solvent, sister to Trichlor 1,1,1, however it is not ozone depleting. This is a quick dry of 30 seconds, excellent solvent degreasing, non-residue, dielectric strength, no flash point, non-flammable, not harmful to ozone. In aerosol only.